Home · Services · Whole-Home Surge Protection
Panel mounted surge protection that guards the whole house (AC controls, appliances, electronics) against lightning and utility surges, installed in about an hour.
Surge protection in San Mateo earns its keep twice: when PG&E restores power after a storm or shutoff and the returning voltage spikes, and during the switching events a dense Peninsula grid produces. A panel-mounted protector is the first layer; point of use protection for the home office and entertainment equipment is the second. The scope verifies the ground the protector depends on, because a protector on a poor ground is a decoration.
A burning smell from a panel, sparking, a panel that is hot to the touch, and power loss to half the house are emergencies. Do not keep resetting a breaker that trips instantly, and call.
PLACEHOLDER
Same day and after hours electrical service for power loss, tripping breakers that will not reset, burning smells, and storm damage to a home's electrical system.
Replacement and capacity upgrades of breaker panels: obsolete and recalled era panels, corrosion damaged panels, and 100 amp services outgrown by modern loads.
Safe connection of portable and standby generators: interlock kits, transfer switches, inlets, and whole home standby systems with automatic transfer.
Repair and replacement of home wiring: damaged circuits, obsolete wiring types, aluminum branch wiring remedies, and new circuits for remodels and added loads.
A burning smell from a panel, sparking, a panel that is hot to the touch, and power loss to half the house are emergencies. Do not keep resetting a breaker that trips instantly, and call.
The main price factors for whole-home surge protection are covered in the cost section above. The contractor confirms the exact price in a written estimate after seeing the job, and nothing is owed until you approve it. The call and the referral are free.
Yes, and it is the standing finding in the bayshore tracts. Salt-laden air off San Francisco Bay corrodes outdoor device contacts, service equipment, and panel interiors faster than the same parts age inland. The signs are green or white corrosion at connections, GFCI devices that fail early, and breakers that run warm. The remedy is replacement of the corroded parts with conductors cut back to sound metal, graded honestly in the written assessment.
Published national guides put electricians commonly at $50 to $100 or more per hour plus a service or trip fee, with small jobs (a device replaced, a fault traced) often landing between $150 and $400 all in. By the project: breaker panel replacement commonly runs $1,300 to $3,000, a generator interlock or transfer switch hookup $500 to $1,500, whole home surge protection a few hundred dollars installed, and whole home standby generators $10,000 to $15,000 or more installed. Written pricing after the assessment, with permit costs stated, is the number to compare.
A breaker trips for three reasons: the circuit is genuinely overloaded, there is a short or ground fault on it, or the breaker itself has failed. Resetting once after unplugging loads is reasonable diagnostics. A breaker that trips instantly, trips with nothing running, or feels warm is reporting a fault, and repeatedly forcing it is how a protection device becomes a fire starter. The tracing order is panel, then the circuit's devices and junctions, and the finding is usually a specific device, a damaged conductor, or an appliance confessing. That visit is a repair, not a mystery.
Prefer to talk later? Leave your details and an independent local pro will call you back. No charge to you, no obligation.
Laurelwood Electric is a free referral service. Submitting this form connects you with independent local contractors who provide the work.